|
|
|
MATERIALS The wood species shown below are finished with a clear natural lacquer finish. These are just samples, grains and colors can vary greatly. It is possible to create numerous colors and shades using stains, tints, bleaches, and dyes. Custom colors and stains are available at additional costs. We strive to use only Certified Wood
.The world has lost nearly two-thirds of its original forest cover and whatever remains is
disappearing at the rate of more than 2.3 acres per second – more than 42 million acres
annually. |
ALDER
aliases Red Alder DESCRIPTION
This is a medium-hard Pacific Coast hardwood, often considered as a lower
cost substitute for Birch. Alder is medium in strength, low in durability
and light in weight - about 33 pounds per cubic foot. The lumber is of
fairly straight grain, uniform texture and little distinctive figuring.
When freshly cut, Alder is almost white, then darkens to a mellow reddish
brown after exposure. working Works and turns fairly easily, with some
tearing of grain. Glues, sands and finishes well, although difficult to
stain evenly. USES Furniture, casework, woodenware, toys, plywood
corestock. Readily available
|
|
|
BLOODWOOD
aliases South American wood of the same family as
Capomo, Ojoche and Breadnut. Weighs 55 to 62 pounds per cubic foot.
Blood-wood has a distinctive deep red to pinkish-red coloration which
tends to remain bright upon exposure. Its grain pattern is normally plain,
but with some lustrous pattern resembling fiddleback noted. Both flat cut
and quartered grain patterns are cause of its extreme hardness and brittle
nature, grain tends to tear with working. uses Decorative items, game
boards, turnings, inlay, marquetry. working Turns and works with some
difficulty, as it tends to be brittle. Sands to a smooth luste
Cardinalwood description A dense, very hard
|
|
|
CHERRY aliases
Black Cherry, American Cherry description This popular furniture hardwood
is found primarily in the Appalachian Mountains of New York, Pennsylvania
and West Virginia. It is a hard, straight-grained wood with fine texture.
Heartwood is reddish brown to deep red, with brown flecks and some gum
pockets. Sapwood is pink. Weighs about 36 pounds per cubic foot. Cherry
bends well, has moderate strength and shock resistance. working Turns,
carves, works and glues extremely well. Holds crisp detail when carved.
Difficult to stain evenly. uses Furniture, cabinetry, wood carving,
turnery, tobacco pipes, musical instruments. |
|
|
EBONY-MACASSAR-Text
is not yet done |
HICKORY
(CARYA GLABRA)SOURCE South Eastern USA & Canada. DESCRIPTION The color can range from white to reddish-brown to brown. Typically straight grained, but may be wavy or irregular. May also have a rather course texture. APPLICATIONS Architectural veneers, furniture uses and paneling. AVAILABILITY Available. ALTERNATIVES Pecan, Ash. |
KOA
description Heartwood is reddish to dark brown with regular dark to brown zones marking the growth rings showing as black lines on longitudinal surfaces. The grain is interlocked, sometimes wavy or curly.
|
MADRONE
is primarily found in northern California and southern Oregon.
Distinguished by a very consistent salmon color, beautiful knot patterns
and a smooth grain. Prized for exotic flooring, furniture, cabinetry.
Madrone is a hard, heavy and strong wood, and is one of the best machining
of all hardwoods. It may be stained, but to retain the wood's naturally
exotic figure and color, clear finishes are usually desired. |
MAHOGANY HONDURAS (SWIENENIA MACROPHYLLA) SOURCE
Central and parts of South America.
DESCRIPTION Honduras Mahogany is lighter in color ( pink to golden brown), firmer in texture and straighter in grain than African
Mahogany. This wood produces a straight to plain stripe when sliced on the quarter.
APPLICATIONS Honduras Mahogany can be used for rich traditional designs in plain,
fiddleback, mottle or crotch forms. Flat cut
veneer is very popular in high end office and reproduction furniture.
AVAILABILITY Plentiful. ALTERNATIVES Makore, Sapele, Anegre, African Mahogany. |
MAPLE aliases
Rock Maple, Sugar Maple description Native to the northeastern U.S. and
Canada. A strong, heavy wood (44+ pounds per cubic foot) with cream to
reddish-brown heartwood. Often found in Birds Eye, burl, fiddleback,
quilted and other figured grain patterns. working Works well with hand and machine tools, although highly figured grain may tend to tear. Glues satisfactorily, somewhat difficult to stain, but sands and finishes well. uses Furniture, cutting surfaces, paneling, kitchenware, flooring, molding, industrial applications where stability and toughness are required. |
MAPLE BIRDS-EYE
Text is in the works |
OAK
RED (QUERCUS RUBRA)SOURCE Eastern U.S., primarily Appalachians, Ohio & Kentucky. DESCRIPTION Slight reddish tinge, more uniform in color, with a less prominent flake than White Oak. A course grain, with large pores. Red Oak is available flat, quartered or rift cut. APPLICATIONS Domestic Red Oak is among the most extensively used species, Its applications run the gamut of millwork and furniture uses. Architectural veneer uses are generally limited us exceptionally clear or figured logs. Plentiful. ALTERNATIVES Red Elm, White Oak. |
OAK WHITE Description Varies in color from pale yellow-brown to
biscuit with a pinkish tint. Straight grain, with the characteristic silver grain on quartered material. |
PADUKE-text
is in the process of being written |
ROSEWOOD-honduran description A coarse-textured, tough, durable member of the
Rosewood family, Honduras Rosewood has been exported from Central America since the
1840's. It is one of the heavier hardwoods, weighing 60 to 70 pounds per cubic foot. Color
ranges from pink to purple-brown with black markings. Many pieces have a distinctive wavy
grain. working Somewhat difficult to work, dulls tools. Use care in gluing due to waxy resins. uses ments (marimba and xylophone bars), piano parts, turnery, marquetry, small decorator items. |
TEAK
(TECTONA GRANDIS)SOURCE Burma, Java, East India, Thailand DESCRIPTION Teak color varies among the hues of tawny yellow to dark brown and is characterized by mineral streaks that provide a contrasting grain structure. Teak has a strong, tough, oily texture. This wood can be cut flat or quartered. APPLICATIONS Historically, Teak has been the primary species used for ship building, decking and rails. The veneer is used in all major categories of architectural paneling, door and accent applications. ALTERNATIVES Koa, Papao. |
TULIPWOOD description
This beautiful, even grained Brazilian hardwood is distinct in its
appearance rom the other rosewoods. It is remarkable for its color: creamy
yellow, with pink to reddish purple stripes. The colors fade somewhat on
exposure, but the wood remains decorative. Tulipwood is as Heavy as the
denser rosewoods, weighing about 55 pounds per cwood emits a pleasing
fragrance resembling the flower for which it is named. working Tulipwood
turns and works with some difficulty, as it tends to be brittle and
splinters; sands to a soft luster. uses Inlay, marquetry, game boards,
small turnings and decorative items. |
WALNUT
(JUGLANS NIGRA) SOURCE U.S. Central StatesDESCRIPTION Color range is light grey-brown to dark purplish-brown. This one species produces a greater variety of figure types than almost any other wood. Longwood that is flatcut, quartered or half-round has characteristics that include plain, figured, pin knots, mineral streaks, mud flair, and knots. APPLICATIONS One of the most familiar and revered domestic woods, walnut is used in all types of furniture, doors, casework and accents. This wood lends a classic feeling to any design. Readily available. ALTERNATIVES Orientalwood, Butternut, Wenge, Mansonia. |
ZEBRAWOOD aliases Zebrano, Zingana description
Zebrawood is a coarse, stable, heavy African hardwood weighing about 47 pounds per cubic foot.
Heartwood is a light yellow-gold with narrow veining or streaks of dark brown to almost black, giving a
zebra-stripe appearance to quartered material. The grain is interlocked or wavy and produces alternating
hard and soft grained material which makes the lumber difficult to work. working Turns and works with difficulty, because of
variation of grain hardness. Glues, sands and finishes well. uses Accent furniture items, veneer,
marquetry, smallboxes and other decorative items. |
| No Picture of AROMATIC CEDAR |
|
|